Filter
Top Products
Basic functions
33
Basic functions
This section contains the following topics:
• “Starting and exiting the MCC 3100 application” on page 33
• “Logging on and logging off” on page 34
• “Hiding the MCC 3100 application” on page 34
• “Overview of the main screen” on page 35
• “Navigating screens” on page 37
• “Accessing Help” on page 38
Starting and exiting the MCC 3100
application
This section describes how to start the MCC 3100 application.
To start the MCC 3100 application on a Nokia device, perform the
following steps:
1. Press the Menu button.
2. Select the Nortel MCC 3100 application icon.
3. Select Yes to allow this application to use the network to send and
receive data.
The MCC 3100 application starts.
On some Nokia devices, the application icon is available under Menu >
Installation.
To exit the MCC 3100 application on a Nokia device, perform the
following steps:
1. Go to the Main screen.
2. From the menu, select Quit.
The Quit confirmation screen appears.