Filter
Top Products
Software installation
19
6. Highlight the MCC 3100 icon, and then press Options > Move.
A check mark appears in the upper right corner of the icon.
7. Use the five-way scroll key to select the screen position where you
want to place the MCC 3100 icon, and then press the scroll key.
The MCC 3100 icon moves to the position you selected.
Note: If you do not move the application icon to the Main screen, then
the MCC 3100 is available in the installat folder.
Upgrading the MCC 3100 for Nokia
software from a computer
This section describes how to upgrade or reinstall the MCC 3100 for
Nokia software. When you upgrade the software, your data is saved
automatically.
1. Connect the Nokia device to a PC using a Universal Serial Bus (USB)
cable.
2. Exit the MCC 3100.
3. Perform the following steps:
a. On your Nokia device, press the Menu key.
The Menu screen appears.
b. Select Tools > App. Mgr.
The Application Manager screen appears.
c. If you are upgrading from MC 3100 Release 2.1, scroll to
MCC3100-N.sis and select Options > Remove.
Note: Do not remove MCC3100-N.jad.
d. Restart the device.
4. Connect the device to the computer.
5. Perform the procedure in “Installing the MCC 3100 for Nokia software
from a computer” on page 15.