Nortel Networks 2002 IP Phone User Manual


 
Configure options on the IP Phone 2002
48
Configure Area Code set-up
The Area Code set-up menu enables a user to save up to 3 area codes.
When an incoming call arrives with an area code that matches one of the
3 stored area codes, the incoming call number is re-ordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number). This re-ordering is also
performed when a user scrolls through their Callers List. To configure the
area code, press the Services key and select Call Log Option from the
Telephone Option menu.
To configure default area codes (3 maximum):
1. Press the Up/Down navigation keys to
scroll and highlight Area Code Setup.
2. Press the Select key.
3. Press the Up/Down navigation keys to
scroll and highlight one of the following:
Area Code # 1
Area Code # 2
Area Code # 3
4. Press the Select key.
5. Use the dialpad to enter the number at
the prompt.