YML749Rev1 V100 User Guide
www.netcomm.com.au 25
Telephone Book Tab
The Telephone Book should only be used in SIP "non-proxy" mode (Refer to the section on SIP Tab
- to configure this setting). With the "Telephone Book" you do not need to subscribe to a VoIP
service provider.
You will need to obtain the public IP address and SIP outbound address port of the SIP Phone or
ATA you wish to communicate with.
All this information is required to build a valid phone book entry.
The telephone book allows you to store speed dial numbers which are mapped to a public IP address
along with a specific port on the Internet.
Click on the Add button to bring up the following window: