Filter
Top Products
YML749Rev1 V100 User Guide
www.netcomm.com.au 13
Option A - Ethernet ADSL Internet Connection
Connect the V100 ATA to your ADSL modem as illustrated in the following diagram:
Figure 1 - Connecting the V100 ATA to an ADSL Router/Modem
1. Connect the Phone socket on the rear of your V100 ATA to an analogue telephone using a
RJ-11 cable.
2. Connect the WAN socket on your ATA to one of the LAN ports of your router/switch
using a Category 5 cable.
Note: If you do not have any spare Ethernet ports on your ADSL modem / router and
you would like to connect to the Internet with your PC, you will need to add a
switch to the ADSL router/modem.
3. Connect the POWER socket on the rear of your V100 ATA to the power adaptor supplied
and plug into a wall socket.
Note: If you have a Telstra telephone line you are still able to receive PSTN calls, but
you will need a microfilter and an additional analogue telephone.
Do not under any circumstanced connect the V100 directly to a phone line.