Filter
Top Products
V100 User Guide YML749Rev1
20 www.netcomm.com.au
SIP Tab
Clicking on the SIP tab brings up the following window:
Local
The sub-tab labelled Local has the following sections:
■ Host
■ Phone Configuration
■ Proxy and Registrar
Let us take a look at these sections now.
Host
Max Digits (1-24): Indicates the maximum number of digits (numbers) you can dial
using the V100 ATA. Default: 24.
Port No.: The port on the host used to communicate with the remote end.
Default: 5060. This port can be changed.
MaxRings: The number of rings before an incoming call is answered.
Default: 15. Maximum is 50.
Use Proxy: In order to use the V100 ATA with a VoIP service provider you
will need to specify a Proxy server which the V100 ATA
communicates with. Choose Yes and enter the details under the
Proxy and Registrar section. Choose No if you only want to use
the V100 in Peer-to-Peer mode. (Refer to the section on
Telephone Book Tab for instructions.)