NEC SV8100 Answering Machine User Manual


 
Document No. SIB 244 Page 32 of 52 1
st
July 2008
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
Placethefile(forexample:test.gz)intothedefaulthomedirectory.
ConfiguringaDHCPserverusingWindows2003Server:
IntheDHCPserverhighlighttheservermachineon thelefthandside.Rightclickontheserverand
choose“DefineVendorClasses”.
o ClickonADD
o DisplayName=NECDT700
o Description=autoconfig
o Inthe
samewindowdownbelowthereisasectionthatshowsID,Binary,andASCII.Clickin
thatwindowunderASCII.NowtypeinNECDT700.Thisshouldhavealsoadded4E45434454
373030underthebinarysection.NowclickonOKandclose.
Highlightthe
serveragainthenrightclickandchoose“SetPredefinedOptions”.
o ChangetheoptionclasstoNECDT700.
o ClickADDandgivethefollowinginfo
Name=FTPAddress
DataType=IPaddress
Code=141
ClickonOKthenstarttheprocessoveragain
o
ClickonADDandgivethefollowinginfo
Name=AutoConfigFileName
DataType=String
Code=151
o ClickonADDandgivethefollowinginfo
Name=DownloadProtocol
DataType=Byte
Code=163
o Clickon
OK
Highlightscopeoptionsonthelefthandsidethenrightclickandchoose“ConfigureOptions”.
o ClickonAdvancedandchangethevendorclasstoNECDT700.
o Placeacheckmarknextto141FTPAddre ss.DownbelowassigntheIPaddressoftheFTP
serverthenclick
apply
Placeacheckmarknextto151autoconfigfilename.Downbelowtypethenameof
theconfigfilethatwasbuiltviaIPphonemanager.Thenclickonapply.
E.g.Test.gz.
o Placeacheckmarknextto163downloadprotocol.DownbelowchangeHEXaddress
to0x1.
o ClickonapplyandOK.
Oncethefilehasbeenloadedtotheproperdirectorystart
theFTPse rver.
AtthispointtheFTPservercanbeminimizedtoruninthe
background.