Filter
Top Products
Document No. SIB 244 Page 10 of 52 1
st
July 2008
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
Software Versions
Package Application Version Files
CD‐CP00‐AU MainSoftware 1.00
CPUDSP Firmware 7920
PZ‐VM21 Firmware 8320
PZ‐BS10/BS11 Firmware 7915
CD/PZ‐8/16DLC Firmware 2.2 122211
CD/PZ‐4/8LC Firmware 2.5 202511
CD/PZ‐4/8COT Firmware 2.3 302311
CD‐4DIOP Firmware 2.2 402211
CD‐4ODT Firmware 2.1 502111
CD/PZ‐4BRI Firmware 2.3 602313
602323
602333
CD‐PRT Firmware 2.4 702413
702423
702433
CD‐LTA Firmware 2.3 1B2313
1B2323
1B2333
PCPro PCApplication 1.00.00
3rdPartyTAPIDriver PCDriver 1.0.1
1
st
PartyTAPIDriver PCDriver 1.0.1
ACD‐MIS PCApplication 1.00RC2
SP310SoftPhone PCApplication
SmartPhone PCApplication
DT300DigitalTerminals Firmware 1.35
DT700IPTerminals Firmware 1.3.0.0
CD‐CP00‐AUMainSoftware
AsingleversionofmainsoftwarewillbeprovidedfortheSV8100CD‐CP00‐AU(CPU).Capacity,featuresand
functionalityprovidedbythissoftwarewillbeconfiguredviaactivationcodes(licenses).
Toincreasecapacitybeyondasinglechassisor64ports,thePZ‐ME50‐AU
MemoryModuleandlicensingis
required.Whenthisisinstalled,theCPUwillrun“mainex.bin”offthePZ‐ME50,ratherthan“main.bin”offthe
CP00.Bothareprovidedwithineachsoftwarepackage.
SoftwarecanbeinstalledontotheCPUusingoneofthefollowingmethods:
• DirectviaUSBMemory
Stick
• RemoteviaDialupModem(PZ‐VM21required)
• RemoteviaLAN(licensemayberequired)