NEC DTR-IR-2 Cordless Telephone User Manual


 
Basics [ 15 ]
BASICS
Basics
Making and Receiving Calls
With the handset's duplex speakerphone, you can have hands-free
conversations.
The icon appears on the display screen during hands-free conversations.
You can easily switch a call from normal conversation to hands-free
conversation. To switch a call, press
speaker during the call.
From the Handset
From the Handset
Normal conversation
Hands-free
conversation
To answer a call
Handset On the Cradle
Pick up the handset (AutoTalk is:
on) or pick up the handset and
press talk/flash (AutoTalk is: off).
Handset Off the Cradle
Press any number key,
*
/tone/<,
or #/> (Any Key Answer), or
press talk/flash.
Handset Off the Cradle
Press speaker.
To make a call
Handset Off the Cradle
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then press
talk/flash.
Handset Off the Cradle
1) Press speaker.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then
press speaker.
To hang up Press end or return the handset to the cradle (AutoStandby).
To enter a pause
within the dialing
sequence
When you dial the number in standby mode, press the PAUSE
soft key.
P
appears in the display, which represents a pause.
6CNM

/76' /'07
For best performance talk alternately with the caller in a quiet room.
You can decrease the speaker volume if you or the other party has
difficulty hearing.
note
To set "Autotalk", see page 11 or to set "Anykey Answer" see page 12.
The handset microphone is located at the bottom of the handset (see "Controls & Functions" on page 2).
Position yourself as near to the handset as possible and speak clearly.
note