Filter
Top Products
Getting Started [ 9 ]
Connecting the Charger
1 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall
outlet.
2 Set the charger on a desk or tabletop, and place the handset in the charger
with the keypad facing forward. (See “B. Install the Rechargeable Battery Pack
into the Handset” on page 6.)
Register the Handset
Handsets supplied with the phone are registered to the base by the factory.
When charged, pre-registered handsets display a handset ID number. Handsets
that have not been registered display
Place handset on main base to register
.
When you register a handset to the base, the handset ID will be assigned.
1 Before registering the handset, the battery pack MUST be charged for 15~20 hours.
2 Place the handset in the main base unit to begin registration.
3 While the handset is registering,
Handset Registering
will appear in the LCD. When
Registration
Complete
is displayed, the handset has been registered to the base. If
Registration Failed
appears, please
try these steps again.
Charge the handset battery pack for at least 15~20 hours before
using your new cordless telephone for the first time.
note
2NCEGJCPFUGV
QPOCKPDCUG
VQTGIKUVGT
/76' %9&:
The handset can be registered when the main base is in standby
mode.
note