Filter
Top Products
IP8820 Nortel IP Phone
User Guide
To set the date display format:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.
o Dial 6, or move the cursor to 6.Time Configuration using the Previous-Next softkeys and press
the OK softkey.
19 Apr. ‘09
Date Format
*DD Mon (01 Jan)
o Dial 5, or move the cursor to 5.Date Format using the Previous-Next softkeys and press the OK
softkey.
o Press the Previous-Next softkeys to select the display
format and press the OK softkey to save your entry. An
asterisk, », displays in front of the current setting.
Previous
N
ext OK
o Move to another parameter with the navigation buttons and continue the session or press the
Setting (
) button to exit the configuration session.
5.7. Lock Outgoing Call
The IP Phone can be configured to allow outgoing calls only if a password is entered. When enabled, the
LCD screen will display the password request and the pad-lock icon is shown, and the password must be
entered prior to connecting an outgoing call.
Enter Password:
****
Å
Clear OK
To activate this feature, the LCD password must be set, consult your system administrator to set the LCD
password.
To enable/disable the Lock Outgoing Call feature:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.
Lock Outgoing Call
Current value is ‘Yes’.
o Dial 8, or move cursor to 8.Lock Outgoing Call using the Previous-Next softkeys and press the
OK softkey.
o Press the Yes softkey to enable Lock Outgoing Call, or
press the No softkey to disable Lock Outgoing Call.
Yes
N
o
o Move to another parameter with the navigation buttons and
continue the session or press the Setting (
) button to exit the configuration session.
5.8. Enabling Speed Number Dialing
The IP8820 Phone includes a Phone Book that supports up to 100 entries. Each Phone Book record
includes a two-digit Speed number, see
Speed Number Dialing. When enabled, dialing the Speed
number (00~99) sends the contact number or user id from the associated Phone Book record.
To enable/disable Speed number operation:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.