Filter
Top Products
Mitel 5330/5340 IP Phones - User Guide
To adjust the display brightness and contrast using the Settings application:
1. Press Settings or
.
2. Press Brightness and Contrast.
3. Press the Brightness and Contrast '+' or '-' keys to adjust the brightness and contrast of
your screen.
4. Press Save.
Note: Press Cancel at any time to exit this application without making any changes.
Specify Audio Feedback Options
The error beep volume in the phone is related to the volume of the speaker. You can set the beep
volume using this procedure; however, adjusting the speaker volume also affects the beep
volume.
To adjust the volume of the audio feedback:
1. Press Settings or
.
2. Press Audio Feedback.
3. Set the options using the appropriate actions described below:
Option Action
Turn audio feedback off for errors Press Turn Off.
Adjust audio for error beeps Press Volume + or Volume –
Test audio feedback volume level Press Play Error Tone
4. Click Save.
Note: Press Cancel at any time to exit this application without making any changes.
Specify Text Size (5340 only)
To specify the text size that displays on the phone:
1. Press Settings or
.
2. Press Text Size.
3. Select Large Text or Small Text.
4. Press Save.
Note: This setting is available only on the 5340. The default text size on the 5340 IP Phone is
"Small". In some instances, using Large Text size may result in truncated key labels. To restore
proper key labeling, switch to the Small Text setting.
Adjust Ringer Volume and Pitch
To adjust Ringer Volume while the phone is idle:
5330 Phone: 5340 Phone:
1. Press the key that you have programmed
as Superkey.
1. Press the key that you have
programmed as Superkey.
2. Press the No softkey until "Ringer Adjust?"
appears.
2. Press More until the Rng Adjust option
appears.
13