Filter
Top Products
-51-
To answer a waiting Line Interface Module call, or to return to the
original Line Interface Module call, do one of the following:
z
Press and release the hookswitch.
z
Press ( CANCEL ).
z Press the Line Interface Module key.
Hold a Call
To put a current call on hold to answer an incoming Line Interface
Module call:
z
Press the flashing Line Interface Module key. The current call is put on
hold.
To switch between the current call and the held call when one of the
calls is using the Line Interface Module line, do one of the following:
z
If your current call is using the Line Interface Module line, press the
flashing Line key of the held call. The Line Interface Module call is
automatically put on hold.
z
If your current call is using an IP line, press the flashing Line Interface
Module key. The IP line is automatically put on hold.
End a Call
To end a current call when an incoming Line Interface Module call
arrives:
z
Press (CANCEL), and then press the flashing Line Interface Module
key. The current call ends, and you are connected to the caller on the
Line Interface Module line.
To end the current Line Interface Module call when an incoming call
arrives:
z
Press (CANCEL). The current Line Interface Module call ends, and
you are connected to the new caller.