Mitel 5212 IP Phone Telephone User Manual


 
-35-
To answer a call using Handsfree Answerback:
To end a Handsfree Answerback call:
z
Press either ( SPEAKER ) or ( CANCEL ).
Note : When the Handsfree Direct Page call ends, the MUTE key light
returns to the state it was in before the call was established.
Phone state before
Page arrives
To answer the Direct Page
Phone is idle and MUTE
is flashing
1. Check that MUTE is OFF.
2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch from a Handsfree
call to a handset call.
You are on a handset or
headset call, and MUTE
is OFF
1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid, and you are now
speaking to the paging party and have muted your
handset/headset call.
3. Speak to the paging party. Press MUTE to alternate
between handset/headset and handsfree calls.
You are on a MUTED
handset/headset call,
OR, you are on a
Handsfree call
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.