Filter
Top Products
-29-
Messaging – Callback
To leave a Callback Message when you hear busy or ringback tone:
z
Press ( MESSAGE ) or, on a 5224 IP Phone only, press the Callback
softkey.
To respond to a message waiting condition on your 5212 IP Phone:
1. Press ( MESSAGE ).
2. If a password is required, dial your password.
3. Do one or all of the following:
To call the message sender, press #.
To erase the message, press *.
To respond to a message waiting condition on your 5224 IP Phone:
1. Press ( MESSAGE ).
2. If a password is required, dial your password (and press the Enter
softkey if available).
3. Press the Yes softkey, and do one or all of the following:
To display the time the message was sent, press the More softkey.
To display the number of the caller, press the More softkey twice.
To call the message sender, press the Call softkey.
To delete the message, press the Erase softkey.
To view the next message, press ( MESSAGE ).
On a 5224 IP Phone only, you can check for messages from a remote
station:
1. Press ( SUPERKEY ).
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your extension number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter
softkey.
7. Press the Yes softkey.