Mitel 5212 IP Phone Telephone User Manual


 
-45-
Tag Call
Tag Call allows you to signal that you are the victim of a threatening or
malicious call. Using the tag, your system administrator or telephone
company can identify the source of the call and provide this information to
appropriate personnel or authorities.
CAUTION: Tagging a non–malicious call may result in fines or other
penalties.
To tag a malicious call:
z
Press the Tag Call feature key while the call is in progress.
See "Feature Keys" elsewhere in this guide for information on
programming a Tag Call feature key to your phone.
–OR–
z
Press ( TRANS/CONF ) and dial *55.
If the call was successfully tagged "Thank You" is shown on the display;
otherwise, "Not Allowed" is displayed.
Note: Tag Call can be used on active two–party calls only. Calls on hold and
conference calls cannot be tagged.