Filter
Top Products
-12-
Feature Keys
You can use ( SUPERKEY ) on your phone or the Desktop Tool to
program the personal keys as feature keys. The Desktop Tool is a browser–
based interface that makes programming quick and easy. For more
information on using the Desktop Tool, please contact your System
Administrator.
To program some features to a personal key, you must dial a feature access
code. A list of access codes is provided elsewhere in this
g
uide; however, the
codes are flexible and may be different than those in this guide. Ask your
Administrator for a list of codes you can use.
To display information about a key:
1. Press ( SUPERKEY ).
2. Press a personal key that isn't a line key.
3. Press ( SUPERKEY ).
To program a personal key:
1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Personal Keys?" appears.
3. Press * or the Yes softkey.
4. Press a personal key that isn't a line key.
5. Press * or the Change softkey.
6. Press # or the No softkey until the desired feature appears.
7. Press * or the Yes softkey.
8. On a 5212 IP Phone only, press # to save the feature under the chosen
key.
9. Press ( SUPERKEY ), or press another personal key and proceed to
program another feature.
0. Write the feature name on the key label.