Filter
Top Products
Administrator Phone Guide
48
3. Enter the board (module) number, not the unit number, where the device to be seized is
located, while observing the following conditions:
• If you enter a single digit, press # after the digit to continue.
• If you enter an incorrect module number or if the module is not entered in the system,
INVALID BOARD NUMBER appears.
• If you have multiple ports (for example, dual-T1 or Internet Protocol Resource Appli-
cation (IPRA) ports)
ENTER PORT appears.
4. Enter the (port) circuit number of the device to be seized. If you enter a single digit, press
# after the digit to continue. Valid numbers depend on the type of module. If you enter an
invalid module number,
INVALID MODULE NUMBER appears.
• If there is only one device on the selected port, the selected device is seized as if the
user had directly entered the extension or trunk number.
• If there is more than one device on the selected port,
ENTER DEVICE appears. Enter
the number of the device to be seized. Valid numbers depend on the type of devices
installed. If you enter an invalid device number,
INVALID DEVICE NUMBER appears.
When the device has been selected, it is seized as if the user had directly entered the
extension or trunk access number.
5. Dial 9900 (9100 in Europe) to turn off diagnostics mode.
DIAGNOSTICS OFF appears.