Filter
Top Products
56
1. Loginname can be only 'root' or 'administrator'
2. passwd -clean will clear all passwd stored in flash,
please use it with care.
Example:
passwd -set root Your_Passwd_Setting
2.26 [auth]
---------------------------------------------------------------
usr/config$ auth
Root control what command administrator can use.
Usage:
auth -print Display auth switch configuration.
Use item name to do config name (0=Disable, 1=Enabled).
Example: auth -ifaddr 1
2.27 [setmac]
To set mac address please key in command setmac:(when key in MAC
address ,press enter each time after key in two characters). Please get the
MAC address from the bottom of your FXO VOIP units.
-------------------------------------------------------------------------------------------------
usr/config$ setmac
- enter mac address (xxxxxxxxxxxx):
0001a8002baa
- the mac address is 00 01 a8 00 2b aa
- if mac address is correct,please press 'y' to
setup configuration,else press 'n' to continue
y
-------------------------------------------------------------------------------------------------