Filter
Top Products
35
Example : Call out from FXO Line
Proxy Mode Usage: Set gateway under proxy mode. Create a Hotline
table with “line ” command. ---------------------------------------------------------------
usr/config$ line - config 1 hotline 1001
---------------------------------------------------------------
In this example means: if user picks up phone set of FXO Line1, gateway
will automatically dial out “1001”.
P2P Mode Usage: Set gateway under P2P mode. Create phone book table
with “pbook ” command. Create a Hotline table with “line ” command.
---------------------------------------------------------------
usr/config$ pbook - add name micronet ip 10.1.1.1 e164 1001
usr/config$ line - config 1 hotline 1001
---------------------------------------------------------------
In this example means: if user dials into FXO Line1, gateway will
automatically dial out IP address of “1001”.
2.14 [route]
Routing table for your calls
---------------------------------------------------------------
usr/config$ route
Routing table information and configuration
Usage:
route -add [prefix number][dst number][e164 number]
[min number][max number][hunt number]
route -delete index
route -modify index [prefix number][dst number][e164 number]
[min number][max number][hunt number]
route -ip [dst number][e164 number]
route -fxo [dst number][e164 number]
route -print Routing table information.
prefix The prefix of dialed number.
dst Destination port(FXO:1/IP:2).
e164 Destination e164 number(when destination is FXO).
min Min digits.(0 ~ 255)
max Max digits.(0 ~ 255)
hunt Hunt method for busy forward