Filter
Top Products
-add
add a new record to phone book. When adding a record, users
have to specify name, IP, and e164 number to complete the
command.
name
Name to represent caller.
e164
E.164 number for mapping with IP address of caller
ip
IP address of caller
port
Call signal port number of caller
drop
Drop e.164 number when dial out. 0 means to keep e.164
number, 1 means to drop e.164 number when dialing out.
insert
Insert digits.(1~10 digits)
-modify
modify an existing record. When using this command, users have
to specify the record’s index number, and then make the change.
-delete
delete a specific record. For example : pbook -delete 3
Note:
Index number: means the sequence number in phone book. If users do request a
specific index number in phone book, Gateway will give each record a automatic
sequence number as index.
PhoneBook Rules:
The e164 number defined in phone book will fully carry to destination. It is not just a
representative number for destination’s IP Address. In other words, user dial this e164
number to reach destination, destination will receive the number and find out if it is
matched to its e164, including Line number in some particular device.
For example:
usr/config$ pbook -print
index Name IP E164 Port
======================================================================
1 SP5100 192.168.0.242 5100
----------------------------------------------------------------------
70