Memorex MPH7828 Cordless Telephone User Manual


 
F. HOW TO SET RINGER ON / OFF
1. In standby mode, press SCAN / PRG button.
2. Press 5 button, or press (-) button three times.
The current mode is displayed.
3. Press or button to change mode.
4. Press SCAN / PRG button to save and exit.
G. HOW TO SET TIME
NOTE:The time set is for the LCD Display time. If the CALLER ID signal comes in, the time
will adjust automatically.
1. In standby mode, press SCAN / PRG button.
2. Press 6 button, or press (-) button two times.
The current time is displayed.
3. Enter 2 digits hour. The position to edit is blinking.
Use button to delete error entry.
4. Enter 2 digits minute.
5. Press 1 for AM and 2 for PM.
6. Enter 2 digits month.
7. Enter 2 digits day.
8. Press SCAN / PRG button to save and exit.
H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY
1. In standby mode, press SCAN / PRG button.
2. Press 7 button, or press (-) button once.
The current contrast is displayed.
3. Press or button to change the contrast.
The contrast scrolls as 01 02 03 (Three steps).
4. Press SCAN / PRG button to save and exit.
NEW CALL / MESSAGE INDICATOR
On the base unit, NEW CALL LED indicator will flash every 1second when new call
comes in. NEW CALL LED indicator will flash every 2 second when voice mail message
comes in.
On the handset, NEW CALL LED indicator will flash every 2 seconds.
TALKING TIME AND CHANNEL DISPLAY
In talk mode, the LCD Display shows the talking time.
The LCD Display as shown means 1 hour and 12 minutes
and 10 seconds. The using channel is 32.
CALL WAITING ID OPERATION
Call Waiting ID lets you know who is on call waiting while you are still using the telephone.
Before, only a tone alerts you if you have a call waiting. Now, the unit can also show the
Caller Identification on Call Waiting (CIDCW) information using the LCD Display.
NOTE: During conversation and the Call Waiting signal comes in, you will hear the data
signal. Before you use these features on your unit, you must first subscribe to the services
through your local telephone company.
When the Call Waiting signal is heard on the receiver, the LCD Display will show the name and
number just like regular Caller ID. If you wish to speak to this person press the FLASH button.
The Call Waiting ID Records are stored, reviewed, redialed and edited the same as regular
Caller ID Records. Please refer to the CALLER ID OPERATION section for more details.
RINGER ON
RINGER OFF
12:20 AM 10/20
TIME SET
02
CONTRAST
1:12 10 32
TALK
20