Filter
Top Products
4
5
7
6
8
Rear View
1 2
3
Bottom View
(Figure 2)
BASE UNIT CONTROLS
1. 9VDC Adapter Jack: A jack located on the rear side of the base unit used for con-
necting the adapter to the base unit.
2. TEL LINE JACK: Accepts line cord to make connection with modular type telephone
outlet.
3. T / P (Tone / Pulse) Switch: Allows you to select the appropriate dialing service.
TONE for tone dialing or PULSE for rotary service.
4. Charge Terminals: Used for charging handset battery. We recommend that you clean
these contacts periodically with an alcohol-moistened cloth or cotton swab.
5. Page Button: Allows you to locate the handset when it is not on the base.
6. CHG (Charge) / IN USE LED Indicator: Lights up steadily when the phone is in talk
mode and when the handset is being charged on the base. Turns off when the hand-
set is not in use and when the handset is removed from its cradle. Flashes when
paging the handset.
7. NEW CALL LED Indicator: Flashes if the system has new call message and have
message(s) in your voice mailbox (if you subscribe to your telephone company's voice
mail service).
8. Retainer Tab: Allows the handset to hang on the base unit in the wall mount position
13. # /(Shift Right) Button: In program, memory and predial mode, it is used for chang-
ing mode and moving the cursor to the right during edit mode.
14. Headset Jack: For headset connection at hands free conversation.
15. SCAN / PRG (Program) Button: In talk mode, it allows you to change channels if the
current channel is noisy or having interference from other sources. In standby mode, it
allows you to enter and store program function.
16. NEW CALL LED Indicator: Flashes if the system has new call message(s) and have
message(s) in your voice mailbox (if you subscribe to your telephone company's voice
mail service).
17. Receiver: Allows you to hear calls.
9