Filter
Top Products
2. Press the TONE ( * ) button once to switch from Pulse to Tone dialing temporarily.
Pulse dialing mode resumes when the call is ended.
PAUSE FUNCTION
••
••
• In some cases, such as PABX or long distance service, a pause may be needed in the
dialing sequence. Pressing the handset RE / PA button inserts a four-second delay
between dialed numbers.
FLASH FUNCTION
••
••
• Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to
make a new call.
CHANNEL SELECTION (40 Channels)
A. AUTO CHANNEL SCAN
••
••
• When you place or receive a call and handset TALK button is pressed, the unit auto-
scans for a clear channel.
••
••
• Once it finds a clear channel, the handset LCD Display symbol will light steadily.
B. MANUAL CHANNEL SCAN
••
••
• If the existing channel becomes noisy or starts having
interference, you can either move closer to the base unit
or press the SCAN / PRG button on the handset until better
reception is found.
OUT OF RANGE WARNING
••
••
• The handset and base unit communicate up to a certain maximum range. The dis-
tance can be affected by weather, power lines, or even other cordless telephones.
••
••
• If you far away from the base unit, the handset beeps and
"OUT OF RANGE" is shown on the LCD display to warn you
that the background noise level is too high for proper
communication between the handset and the base unit.
••
••
• When you hear this sound and see the "OUT OF RANGE" display, you should move
closer to the base unit. Otherwise, the call will automatically cut off after 30 seconds.
LOW BATTERY WARNING
••
••
• When the handset battery voltage level is low, the handset LOW symbol is shown
on the LCD Display.
••
••
• Return the handset on the base cradle to charge.
PAGING FUNCTION
••
••
• If you have misplaced the handset or need to alert the
person nearby the handset, press the PAGE button on the
base unit. Each press of this button will activate the handset
to beep for 30 seconds and LCD Display shows "BASE CALL"
while it is being paged by the base unit.
NOTE: Even if the handset is in RING OFF mode, the base unit can page the handset.
(Figure 13)
OUT OF RANGE
BASE CALL
16