Filter
Top Products
SETTING USER'S AREA CODE AND NEIGHBORING AREA CODE
In order to use callback function, the user's area code and neighboring area code must be
programmed. Neighboring area code is optional. See PROGRAMMING MODE section on
page 19.
SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION
The CIDCW function must be set to ON position in order to use CIDCW function. See
PROGRAMMING MODE section on page 19.
TELEPHONE OPERATION
TO PLACE A CALL IN TALK MODE
1. Press the TALK button on the handset. The LCD Display
will show "TALK" and the symbol will flash while the unit
auto-scans and will light steadily when it finds a clear channel.
2. Listen for a dial tone.
3. Dial the telephone number. The phone numbers appear on the LCD Display as you
enter the number.
4. When finished with your call, press the TALK button or place the handset on the base
unit.
TO PLACE A CALL IN STANDBY MODE (PREDIAL MODE)
1. Ensure that the unit is in standby mode. The base unit IN USE LED indicator is off.
2. Dial the telephone number or press RE / PA button. If you make a mistake, press
button to delete the character on the left of the cursor.
3. Press C. BACK button.
4. When finished with your call, press the TALK button or place the handset on the base
unit.
TO RECEIVE A CALL
NOTE: If you are expecting incoming calls, the handset must be programmed to RING ON
mode. See PROGRAMMING MODE section on page 20.
A. IF THE HANDSET IS ON THE BASE UNIT
1. Since the unit features "Auto-Answer", simply pick up the handset from the base cradle
when the phone rings. The LCD Display will show " TALK" and the symbol will light
steadily.
2. Start your conversation.
3. To end your conversation, either press the TALK button or place the handset on the
base unit.
B. IF THE HANDSET IS OUT OF THE BASE UNIT
1. When the phone rings, press the TALK button on the handset. The LCD Display will
show "TALK" and the symbol will light steadily.
2. Start your conversation.
3. To end your conversation, either press the TALK button or place the handset on the
base unit.
LAST NUMBER REDIAL
A. AFTER HEARING A BUSY TONE WHEN PLACING A CALL
1. If you get a busy tone, press handset TALK button to hang up.
2. Press the handset TALK button again and listen for a dial tone.
3. Press the handset RE / PA button. This will automatically redial the last telephone
number you called (Up to 31 digits).
(Figure 12)
13