Memorex MPH2089 Answering Machine User Manual


 
OPERATION (CONTINUED)
8
Press and hold the SKIP❿❿/OGM
button for approximately 2 seconds
until a short beep is heard, and then
release the button. Begin recording
your outgoing message speaking in a
normal tone of voice.
Typical Message: “You have reached
the Smith residence. We are not able
to come to the phone right now. If
you’ll leave your name, phone number
and a brief message after the beep,
we will call you back.”
1
When finished recording, press the
PLAY/STOP button . The newly
recorded outgoing message will then
play once. Make sure the VOLUME
control is at a desirable level.
To record a new outgoing message,
please repeat steps 1 and 2.
2
1
2
RECORDING OGM (OUTGOING MESSAGE )
Recording an OGM allows the caller to hear the OGM and then be able to leave a
message. Please note that there is an automatic message on this unit, recording
a new OGM will disable this default message.
NOTES:
If an invalid OGM is left, the unit will revert back to the default OGM.
Make sure to raise the SPEAKER VOLUME when setting the OGM.
TO REVERT BACK TO THE DEFAULT OGM: While in the Power Off or Play
OGM mode, press the DELETE button.
Press and release the SKIP❿❿/OGM
button and the selected Outgoing
Message will play.
1
VERIFYING THE OUTGOING MESSAGE
MPH2089 O/M.QXD 9/4/01 10:30 AM Page 8