Filter
Top Products
OPERATION (CONTINUED)
9
NOTES:
• If the unit detects a dial tone, silence or a busy signal, the unit will hang up and
may not register the message.
• When the memory is full, no ICMs can be recorded.
• When the batteries are low, dead or not installed, “Lo” will appear in the display.
Make sure the OGM is recorded.
Press the ON/OFF button; the NEW
MESSAGE indicator will light solid and
the unit will announce, “Answer On”
1
SETTING THE UNIT TO ON MODE (Incoming Messages will be
recorded)
When the answering machine is turned on, when a call is received the unit will
play the OGM and then record a message.
SETTING THE UNIT TO THE ANSWER-OFF MODE
Press the ON/OFF button and the NEW MESSAGE indicator will go out and the unit
will announce, “Answer Off”
TOLL SAVER
This unit has a built-in toll saver feature that will have the answering machine answer
the call after 4 rings when no new messages have been recorded and it will answer
after 2 rings when messages have been recorded. This is useful in if calling in to get
your messages.
MPH2089 O/M.QXD 9/4/01 10:30 AM Page 9