Filter
Top Products
OPERATION (CONTINUED)
12
To stop playback, press the
PLAY/STOP button and the unit will
save the previous messages.
5
NOTES:
• After playing the ICMs, the unit will automatically reset to take new messages.
• The maximum recording time for an ICM (Incoming Message) is 60 seconds.
IF MEMORY IS FULL
If the memory is full, the unit will not allow any new messages.
To erase a single message or memo
while playing it back, press the
DELETE button. The unit will delete
the current message and play the next
message.
1
To delete all the messages, press and
hold the DELETE button while in the
Stop mode for 3 seconds, “E5” will
appear in the display and all
messages will be deleted.
2
DELETING INCOMING MESSAGES AND MEMOS
CHANGING THE REMOTE CODE
To change the remote code, please
follow the instructions given on page
17.
NOTES:
• If a power failure occurs and there
is a dead or no battery, the Remote
Code resets to 000.
• If you forget the Remote Code,
unplug the AC adaptor and
disconnect the battery and it will
reset to 000.
• Be sure to write down your new
Remote Code and store it in a safe
place.
MPH2089 O/M.QXD 9/4/01 10:30 AM Page 12