Filter
Top Products
SP200/210 Maxon SP200/210 Radio
Issue 1.0 INSTALLATION, COMMISSIONING & ALIGNMENT
03/01 Page 4-3
Commissioning Equipment
1
3
4
5
2
Figure 4-5 – Commissioning Kit
Note
: For those dealers who already have the SK2055 Service Kit (SL25/55) the audio cable (2),
CA8700, may be purchased. This interfaces the Service Kit to the SP200/210 and allows all simple,
commissioning audio measurements to be made. SMA adapter (5), ME210089 will also be required.
Flexi-pcb (3), ME110016 may be required if simple internal adjustments are to be made.
Note
: The equipment shown in Figure 4-5 allows only VCO and power adjustments to be made to the
SP200/210. The full Service Kit, SK3100, is required for setting deviation.
Please refer to Figure 4-6 for the set-up using discrete test equipment and Figure 4-4 for the set-up
using the Communications Test Set. If the ACC-2003 Interface Box is used, please refer to
Figure 4-7.