Filter
Top Products
Wireless-G IP Phone
36
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Wireless
You have two choices, Set Wi-Fi and Profiles. If you want to scan for wireless networks in your local
area, select Set Wi-Fi. If you want to configure configuration profiles for different network setups,
select Profiles. Press the left softkey to make a selection. Select Return to return to the previous
menu.
Set Wi-Fi
After you have selected Set Wi-Fi, the IP Phone will scan the local area for wireless access points or
routers.
A list of wireless networks will be displayed and show their wireless network names, security
status (a lock indicates wireless security), and signal strength, which is indicated by a bar graph.
Scroll through the network choices, and press the center selection key (in the middle of the navigation pad) to
select the wireless network you want to use.
If the network you want is not shown, select Rescan for a new scan.
Figure 4-43: Wireless
Figure 4-44: Scanning
for Wireless Networks
Figure 4-45: List of
Wireless Networks