Filter
Top Products
10
Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Phone Adapter with 2 Ports for Voice-over-IP
Set Static IP Address 111 Enter the IP address
using numbers on the
telephone keypad. Use
the * (star) key when
entering a decimal
point.
To set a static IP address, the DHCP
feature must be disabled. If the DHCP
feature is enabled, then you will hear,
“Invalid Option,” if you try to set a
static IP address.
Check Network Mask
(or Subnet Mask)
120 You will hear the current network
mask of the Phone Adapter.
Set Network Mask (or
Subnet Mask)
121 Enter the network
mask using numbers
on the telephone
keypad. Use the *
(star) key when
entering a decimal
point.
To set the network mask, the DHCP
feature must be disabled. If the DHCP
feature is enabled, then you will hear,
“Invalid Option,” if you try to set the
network mask.
Check Static Gateway
IP Address
130 You will hear the current gateway IP
address of the Phone Adapter.
Set Static Gateway IP
Address
131 Enter the IP address
using numbers on the
telephone keypad. Use
the * (star) key when
entering a decimal
point.
To set a static gateway IP address, the
DHCP feature must be disabled. If the
DHCP feature is enabled, then you will
hear, “Invalid Option,” if you try to set
a static gateway IP address.
Check MAC Address 140 You will hear the MAC address of the
Phone Adapter in hexadecimal string
format.
Check Firmware
Version
150 You will hear the version number of
the firmware currently installed on the
Phone Adapter.
Interactive Voice Response Menu
Action Command
(press these
keys on the
telephone)
Choices Description