Filter
Top Products
9
Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Phone Adapter with 2 Ports for Voice-over-IP
For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the #
(pound) key to indicate that you have finished entering the IP address, and then press 1 to save the IP address. To
cancel your entry and return to the main menu, press * (star).
If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the
menu by pressing ****.
The settings you have saved will take effect after you have hung up the telephone. The Phone Adapter may reboot
at this time.
Interactive Voice Response Menu
Action Command
(press these
keys on the
telephone)
Choices Description
Enter Interactive Voice
Response Menu
**** Use this command to enter the
Interactive Voice Response Menu. Do
not press any other keys until you
hear, “Configuration menu. Please
enter option followed by the # (pound)
key or hang up to exit.”
Check DHCP 100 Use this command to find out if DHCP
has been enabled or disabled. If
enabled, the Phone Adapter will be
assigned an IP address automatically
by your network router or gateway. If
disabled, then the Phone Adapter will
use a static IP address.
Enable/Disable DHCP 101 Enter 1 to enable
Enter 0 to disable
Enable or disable the Phone Adapter’s
DHCP feature. If your network router
assigns IP addresses, then enter 1.
Otherwise, enter 0.
Check IP Address 110 You will hear the current IP address of
the Phone Adapter.