Filter
Top Products
8
Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
Overview
Phone Adapter with 2 Ports for Voice-over-IP
Chapter 4: Using the Phone Adapter’s Interactive Voice
Response Menu
Overview
You may need to manually configure the Phone Adapter by entering the settings provided by your Internet phone
service provider. Chapter 4 explains how to use the Interactive Voice Response Menu to configure the Phone
Adapter’s network settings. You will use the phone’s keypad to enter your commands and select choices, and the
Phone Adapter will respond with voice responses.
Accessing the Interactive Voice Response Menu
1. Use a telephone connected to the PHONE 1 or PHONE 2 port of the Phone Adapter.
2. Press **** (in other words, press the star key four times).
3. Wait until you hear “Configuration menu. Please enter option followed by the # (pound) key or hang up to
exit.”
4. Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select an
option, press the # (pound) key. To exit the menu, hang up the telephone.
Using the Interactive Voice Response Menu
While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key
twice within half a second. Otherwise, the * will be treated as a decimal point or dot.
After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection.
To save the new setting, press 1. To review the new setting, press 2. To re-enter the new setting, press 3. To
cancel your entry and return to the main menu, press * (star).
NOTE: If your Internet phone service provider sent you the Phone Adapter, then it may be pre-
configured for you, and you do not need to change any settings. Refer to the instructions provided
by your service provider for more information.