Filter
Top Products
Cordless Internet Telephony Kit
61
Chapter 4: Using the Cordless Internet Telephony Kit
Managing your Handsets
If registration fails, a warning screen will display. The handset will not display the handset number. The Base/
Handset Link icon will flash. You need to repeat the above procedure.
To register your phone to an additional base unit:
1. Press MENU.
2. Press Up or Down to select SYSTEM. Press OK.
3. Press Up or Down to select REGISTER. Press OK.
4. Press and hold on the base unit for 4 seconds; the IN USE LED will be flashing.
5. Enter the PIN code on your handset. (Default 0000)
6. Press OK. You will see a confirmation screen when registration is completed.
Base select
Your phone may be registered to up to 4 base units.
When your phone is registered to more than 1 base unit, you can select a base unit through which you want your
handset to operate.
To select a base, either:
1. Press and hold MENU for one second; you should see the BASE SELECT page.
2. Press Up or Down to select the base you wish. Press OK.