Filter
Top Products
‘ez Phone’ Issue 1.0A
39
Park or Unpark the connected call
¾ *PARK
[Ctrl + ‘+’ or ‘P’] or click Park button on the bottom toolbar.
Parking area should be empty to park connected call. (eg.601)
¾ *UNPARK
[Ctrl + ‘-‘ or ‘U’]
parked call should be existed in the parking area(eg.601)
Note 1 : If you pc is note book, ‘+’ and ‘-‘ is not supported. In this case you have to use ‘P’ or ‘U’.
Note 2 : If your key board is normal, you can use both of them(+,P, -,U