Filter
Top Products
IPLDK-20 Installation Manual Starting the IP LDK-20 System
70
6.2.3.1 RACK SLOT ASSIGNMENT (PGM 101)
1. Press [Trans/PGM] + 101
2. Enter slot number(2 digits).
3. Press [FLEX1]
4. Enter Board Type code(2 digits).
Press [HOLD/SAVE] to accept change.
STA CODE COL CODE STA & COL CODE Etc CODE
DTIB4
DTIB8
SLIB4
SLIB8
11
12
13
14
LCOB2
LCOB4
CBIB
33
34
54
STIB2
STIB1
52
53
VMIB
AAFB
VMIBE
AAFBE
61
62
64
65
Board type of basic MBU(Slot 1, Slot5) and VMIB slot (slot 7) can not be changed.
- Slot 1: Hybrid on MBU.
- Slot 2-3: not used.
- Slot 4: optional STA board.
- Slot 5: CO board on MBU.
- Slot 6: optional CO slot.
- Slot 7: VMIB slot.
- Slot 8: SLIM/DTIM slot.
- Slot 9: VOIM slot.
6.2.3.2 LOGICAL SLOT ASSIGNMENT (PGM 103)
COL Board
1. Press [Trans/PGM] + 103.
2. Press [FLEX1].
3. Enter logical slot number(CO board slot).
(05: CO slot on MBU, 06:Optional CO slot, 09: VOIM slot)
4. Press [HOLD/SAVE] to accept change.
STA Board
1. Press [Trans/PGM] + 103.
2. Press [FLEX2].
3. Enter logical slot number(STA board slot).
4. (01: Hybrid slot on MBU, 04:Optional STA slot, 08: SLIM or DTIM slot, 99: Virtual slot for RSG/IP phone)
5. Press [HOLD/SAVE] to accept change.
VMIB Board
1. Press [Trans/PGM] + 103.
2. Press [FLEX3].
3. Enter logical slot number(VMIB slot : fixed 07 in LDK-20 ).
4. Press [HOLD/SAVE] to accept change.