Filter
Top Products
IPLDK-20 Installation Manual Starting the IP LDK-20 System
68
6.2.3 Pre-programming
Location PGM-Nation Code & Site Name (PGM100)
※ NOTE : The 4th pole of the DIP switch (SW 3) on the MPB must be turned ON.
Procedure
Nation Code
To program the Nation code, perform the following Steps:
1. Press [Trans/PGM] + PGM Number(100), then [Flex1] + 7.
Press [HOLD/SAVE] to accept change.
※ NOTE : Press the reset button after setting the nation code to restart the system
Site Name
1. Press [Trans/PGM] + Enter Site Name (use the following Keyset Map, Max. 24 digits allowed), then [Flex2].
Press [HOLD/SAVE] to accept change.
[Keyset Map]
Q – 11
Z – 12
. – 13
1 – 10
A - 21
B - 22
C - 23
2 - 20
D - 31
E - 32
F - 33
3 - 30
G – 41
H - 42
I - 43
4 – 40
J - 51
K - 52
L - 53
5 - 50
M - 61
N - 62
O - 63
6 - 60
P - 71
R - 72
S - 73
Q - 7*
7 – 70
T - 81
U - 82
V - 83
8 - 80
W - 91
X - 92
Y - 93
Z - 9#
9 - 90
*1 - Blank
*2 - :
*3 - ,
0-00 #