Lennox Hearth BT8040 Bluetooth Headset User Manual


 
5
english
JABRA BT8040 BLUETOOTH STEREO HEADSET
Pair it with your phone
Before you use your Jabra BT8040, you need to pair it with your
mobile phone.
1. Your headset will automatically go into pairing mode when you
turn it on the rst time.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT8040.
Follow your phone’s instruction guide. This usually involves going
to a ‘setup,’ ‘ connect’ or ‘Bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
BT8040
JABRA BT8040
JABRA BT8040
3. Your phone will nd the Jabra BT8040.
Your phone then asks if you want to pair with it. Accept by
pressing ‘Yes’ or ‘OK’ on the phone and conrm with the passkey
or PIN = 0000 (4 zeros). Your phone will conrm when pairing is
complete.
In case of unsuccessful pairing, repeat steps 1 to 3.
Manual pairing
You can manually put your Jabra BT8040 into pairing mode, if you
want to pair with a second phone or Bluetooth device:
1. Make sure the headset is o.
2. Press and hold the answer / end button for approx 5 sec. until
the light turns solid Blue.
3. Set your Bluetooth phone to discover your headset as
described above