Filter
Top Products
11
english
JABRA BT8040 BLUETOOTH STEREO HEADSET
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free prole. Even if the handsfree prole is imple-
mented reject call, call hold and voice dialing are optional features
which are not supported by all devices. Please consult your device
manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra BT8040 with 2 mobile
phones.
The device is not connected to my headset in time to answer
an incoming call
If the headset is o and is turned on when a call is incoming, the
device and headset might not connect in time for the call to be
answered. In order to avoid such inconveniences please keep the
headset on, in range and connected.
The music player starts playing when connecting to the
headset
Some phones may stat the music player once it connects to the
headset. Re-pair your headset to the device in order to avoid this
behaviour.
1. Make sure the headset is o
2. Press and hold the answer / end button for approx 5 sec until
the light turns solid blue
3. Continue press and hold the answer / end button until the solid
blue light turns o
4. Continue press and hold until a solid purple light turns on
Go through the regular steps in paring the headset to a Bluetooth
device.
The music stream from my connected device is choppy or the
music pitch is changing
If you have connected two devices and go out of range of one de-
vice while playing music from the connected device, the headset
will try to reconnect to the lost device. This can cause the audio
stream to be disrupted. For example the music audio is choppy
or the audio pitch varies. In order to prevent this do not go out of
range of your paired/connected devices.