Filter
Top Products
6
RELEASE YOUR JABRA
GB
CN
JA
KO
TH
MA
CN
7
Jabra BT135 Bluetooth headset
GB
CN
JA
KO
TH
MA
CN
6. Turning your headset on and o
• Press the answer/end button to turn on your headset.
•
Press and hold the answer/end button to turn o your headset.
7. Pair it with your phone
Before you use your Jabra BT135, you need to pair it with your mobile
phone. (Follow step 1-4 in g 3).
1. Put the headset in pairing mode
• Make sure the headset is o .
•
Press and hold the answer/end button until a solid blue light comes on.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT135
Follow your phone’s instruction guide. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a
typical mobile phone in g. 3)
3. Your phone will nd the Jabra BT135
Your phone then asks if you want to pair with it. Accept by pressing
‘Yes’ or ‘OK’ on the phone and conrm with the passkey or PIN = 0000
(4 zeros).Your phone will conrm when pairing is complete. In case of
unsuccessful pairing, repeat steps 1 to 3.
8. Wear it how you like it
The Jabra BT135 is ready to wear on your right ear. If you prefer the left,
gently pull out the earhook, rotate the ear hook 180°, and insert. (See g 4).
The earhook can be adjusted to t your ear better – squeeze the back edge
of the earhook for a more secure t.
Your Jabra BT135 can be personalized by exchanging the snap-on cover. To
change cover, gently pull up the cover from the front of the headset. Insert
the new cover by tting it above the charging socket. (See g 5).
For optimal performance, wear the Jabra BT135 and your mobile phone on
the same side of your body or within line of sight. In general, you will get
better performance when there are no obstructions between your headset
and your mobile phone. (See g 6).
9. How to...
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
•
Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset. If your phone
does not support this function, tap on the answer/end button on the
Jabra BT135 to receive the call in the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person who
called you will either be forwarded to your voice mail or hear a busy
signal.
Activate voice dialing*
• Tap the answer/end button. For best results, record the voice-dialing
tag through your headset if your phone allows you to do so. Please
consult your phone’s user manual for more information about using this
feature.
Redial last number*
• Press the answer/end button.
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and
answer the waiting call.
•
Press the answer/end button to switch between the two calls.
•
Tap the answer/end button to end the active conversation.
* Phone dependent
10. What the lights mean
What you see What is the mean about your headset
Flashing blue light Flashing every second: active on a call
Flashing blue light Flashing every three seconds: in standby mode
Flashing blue light Running low on battery
Solid blue light Charging
Solid blue light In pairing mode – see section 7