Kenwood TH-G71E Two-Way Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
24
SCAN
Scan is a useful feature for hands-off monitoring of your
favorite frequencies. After becoming comfortable with
how to use all types of Scan, the monitoring flexibility
gained will increase your operating efficiency.
Note:
Remember to adjust the squelch threshold level before using Scan.
You cannot start Scan while Tone Alert is ON.
While using CTCSS, Scan stops for any signal received; however,
the squelch opens only for signals that contain the same CTCSS
tone that is selected on your transceiver.
This transceiver provides the following conventional
scans in addition to “Priority Scan” {page 30} that may
be new to you:
VFO Scan
All frequencies tunable on the band
MHz Scan
All frequencies within 1 MHz range
Scan Type Scan Range
Frequencies stored in the memory
channels
Memory Scan
All frequencies in the range
selected on the band
Program Scan
Call channel plus the current VFO
frequency
Call/VFO Scan
Call channel plus the memory
channel last used
Call/Memory
Scan
438.525 MHz
Stop