Kenwood TH-G71E Two-Way Radio User Manual


 
23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
INITIALIZING MEMORY
If your transceiver seems to be malfunctioning,
initializing the transceiver may resolve the problem.
Remember that you need to re-program memory
channels after initialization. On the other hand,
initialization is a quick way to clear all memory channels.
Note:
While using the Channel Display or Transceiver Lock function,
you cannot do Partial Reset nor Full Reset.
VHF Band Defaults
UHF Band Defaults
Partial Reset (VFO)
Use to initialize all settings except the memory
channels, the Call channel, the DTMF channels, and
Memory Channel Lockout.
1 Press [VFO]+ POWER ON.
A confirmation message appears.
To quit resetting, press any key other than [VFO].
2 Press [VFO] again.
Full Reset (Memory)
Use to initialize all settings.
1 Press [F]+ POWER ON.
A confirmation message appears.
To quit resetting, press any key other than [F].
2 Press [F] again.
2
1
2
1
VFO
Frequency
Version
Tone
Frequency
Frequency
Step
U.S.A./
Canada
144.000
MHz
5 kHz 88.5 Hz
Europe/
General
144.000
MHz
12.5 kHz 88.5 Hz
VFO
Frequency
Version
Tone
Frequency
Frequency
Step
U.S.A./
Canada
440.000
MHz
25 kHz 88.5 Hz
Europe/
General
430.000
MHz
25 kHz 88.5 Hz