Kenwood TK-3130 Two-Way Radio User Manual


 
37
SAFETY INFORMATION:
Your wireless hand-held portable transceiver has been designed using a
low power transmitter.
When the PTT switch is pressed, the transceiver generates radio
frequency (RF) electromagnetic energy (EME).
This transceiver is designed to comply with the FCC Report and Order
FCC 96-326 (August, 1996).
Do not transmit for more than 50% of the total operating time.
Transmitting for over 50% of the operating time may exceed the
FCC RF exposure compliance requirements. Transmission occurs
while you are pressing the PTT switch and is confirmed by the LED
that lights red while transmitting.
•To transmit, speak into the microphone in your normal voice while
holding the transceiver upright and keep the antenna at least
2 inches (5 cm) from your head and body.
When using a headset, ensure that the antenna is at least 2 inches
(5 cm) away from your body whenever you are transmitting.
Use only KENWOOD genuine accessories. Unauthorized
modifications, or attachments may damage the transceiver and
violate FCC rules and regulations.