Kenwood TK-3130 Two-Way Radio User Manual


 
8
INSTALLING/ REMOVING THE BELT HOOK
If desired, attach the belt hook
to the rear of the transceiver
using the 2 supplied screws.
INSTALLING/ REMOVING OPTIONAL ACCESSORIES
Note: Always switch OFF the transceiver power when installing or
removing the optional accessories.
The following accessories can be used with this transceiver:
KMC-21 Speaker-Microphone
KHS-21 Headset
KHS-1 Headset
EMC-3 Clip Microphone with Earphone
To install these accessories:
1 Open the SP/MIC tabs on the side of
the transceiver.
2 Insert the accessory’s plugs into the
SP/MIC jacks.
3 When you remove the accessory
from the transceiver, be sure to cover
the SP/MIC jacks with the attached
tabs in order to keep dust and dirt
away from the contacts.
Note: Refer to the accessory instruction manuals for detailed
instructions on each of the accessories.