Kenwood TK-3130 Two-Way Radio User Manual


 
16
REVERT CHANNEL
The revert channel is the channel from which you start
scanning. So, for example, if you are on channel 1 when you
begin to scan, your revert channel is channel 1.
During scan, pressing the PTT switch will automatically select
the transceiver’s revert channel (in the above example,
channel 1) and you will begin transmitting. However, if you
are currently paused on the other channel after having
received a signal (in the above example, channel 2), pressing
the PTT switch will allow you to transmit on that channel,
rather than returning to the revert channel. Scanning will
resume after 5 seconds, unless a signal is present on the
channel.