Filter
Top Products
4
ENGLISH
INSTALLING/ REMOVING THE BELT HOOK
1 Align the belt hook tabs with the guides on the rear of the
transceiver.
2 Slide the belt hook down the guides until it locks in place.
3 To remove the belt hook, pull back on the lever on the top
of the belt hook and slide the belt hook out of the guides.
INSTALLING/ REMOVING THE STEREO HEADPHONES
Note: Always switch OFF the transceiver power when installing or
removing the headphones.
1 Open the SP tab on the
top of the transceiver.
2 Insert the headphone
plug into the SP jack.
3 When you remove the
head-phones from the
transceiver, be sure to
cover the SP jack with
the attached tab in
order to keep dust and
dirt away from the contacts.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM4