Kenwood UBZ-GR14 Two-Way Radio User Manual


 
14
ENGLISH
DISPLAY ILLUMINATION
1 To turn the display backlight ON, press the L key
momentarily.
The display backlight turns ON for 10 seconds.
Each time you press any key other than the PTT switch
while the display backlight is ON, the 10 second timer will
reset, allowing the display to remain illuminated for an
additional 10 seconds after releasing the key.
2 To turn the display backlight OFF, press the L key
momentarily while the display backlight is ON.
BATTERY POWER SAVER
This transceiver has been designed to give you the most out
of your battery power. While using the transceiver in FRS
Mode, the battery saver will automatically switch ON after
10 seconds have elapsed with no operations or received
calls. Operating the transceiver or receiving a call will switch
this feature OFF until 10 seconds of non-operation occurs
again.
LOW BATTERY WARNING
When battery power becomes low, the “BATT” icon will flash.
Replace the batteries at this time.
When replacing batteries, replace all batteries at the same
time; do not mix old and new batteries together. Additionally,
use batteries of only the same type; do not mix different
types of batteries together.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM14