Filter
Top Products
8
ENGLISH
1 Press the MODE key momentarily, two times.
• The FRS and SUB icons blink.
2 Press the ▲ or ▼ key to increase or decrease the code
number of the selected channel.
• Press and hold the ▲ or ▼ key to continuously increase or
decrease the code number until you release the key.
3 Once you have selected your desired code number
(01 ~ 38 or OF), press the PTT switch to complete the
selection and return to normal operation.
4 Make sure your other party members are using the same
code that you have set up.
• If each party member is using a different code, you will not
be able to hear each other’s calls.
3 MAKING A CALL
1 When you want to make a call on your selected channel,
first press the M key to alert the other party that you are
about to make a call.
• The transmission indicator and CALL icon appear.
• This step is not necessary when you are responding to a
call, as the other party is already expecting a response.
2 Press and hold the PTT switch, hold the transceiver
about 3 inches (7 1/2 cm) from your mouth, then speak
into the microphone using your normal voice.
• The transmission indicator appears while you are
transmitting.
3 When you finish speaking, release the PTT switch.
Note: If you do not release the PTT switch after you finish talking, you
will not be able to receive any calls. Additionally, pressing the PTT
switch for extended periods will reduce the battery power.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM8