Filter
Top Products
3
ENGLISH
PREPARATION
INSTALLING/ REMOVING THE BATTERIES
This transceiver requires 4 AAA batteries. Use high quality
alkaline batteries to enjoy longer periods of battery life.
1 If the belt hook is installed, first remove it from the
transceiver (refer to “INSTALLING/ REMOVING THE BELT HOOK”
on page 4).
2 Pull back on the battery cover latch, then remove the
battery cover.
3 Insert or remove 4 AAA batteries.
• When inserting batteries, be sure to match the battery
polarities with those marked in the battery compartment.
4 Replace the battery cover, making sure the battery cover
latch locks in place.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM3