Filter
Top Products
EN51
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
8.
Snapshot mode cannot be
used.
9.
The colour of Snapshot
looks strange.
10.
The image taken using
Snapshot is too dark.
11.
Digital Zoom does not
work.
12.
Programme AE with
special effects and Fade/
Wipe Effects do not work.
13.
The Black & White Fader
does not work.
14.
The Dissolve function does
not work.
8.
•The Squeeze mode is
selected.
9.
•The light source or the
subject does not include
white. Or there are various
different light sources
behind the subject.
•The Sepia or Monotone
mode is activated.
10.
•Shooting was performed
under backlit conditions.
11.
•10X optical zoom is
selected.
•“P.AE/EFFECT” is set to
“VIDEO ECHO” in the
Menu Screen.
•Picture Wipe or Dissolve are
being used in a scene
transition.
12.
•The Power Switch is set to
“ ”.
13.
•The Sepia or Monotone
mode is activated.
14.
•The Sepia, Monotone or
Slow Shutter mode of
Programme AE with special
effects is activated.
•“WIDE MODE” is set to
“SQUEEZE” in the Menu
Screen.
•The previously selected
mode of Programme AE
with special effects was
changed after the last
selected scene for editing
was registered.
8.
•Disengage the Squeeze
mode (੬ pg. 22).
9.
•Find a white subject and
compose your shot so that it
also appears in the frame
(੬ pg. 14).
•Turn off Sepia and Mono-
tone (੬ pg. 26).
10.
•Press the BACKLIGHT
Button (੬ pg. 27).
11.
•Set “ZOOM” to “40X” or
“450X” in the Menu Screen
(੬ pg. 21).
•Disengage the “VIDEO
ECHO” mode (੬ pg. 16,
26).
•Wait until the Picture Wipe
or Dissolve effects are
completed (੬ pg. 16, 24).
12.
•Set the Power Switch to
“ ” (੬ pg. 24, 26).
13.
•Turn off Sepia and Mono-
tone (੬ pg. 24, 26).
14.
•Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene
transition (੬ pg. 24, 26).
•Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(੬ pg. 22).
•Make sure you have
selected the mode of
Programme AE with special
effects you want before
starting editing
(੬ pg. 24, 26).
CONTINUED ON NEXT PAGE